Words:
Photos:
The most anticipated new Adventure Rig, the 2021 Ford Bronco, is finally out. Here are some of the new parts available to help you start down the rewarding path of customizing your ride!
01. FRONT BUMPER
A full-width bumper with grille protection, recovery points and auxiliary lighting tabs. Optional winch mount and skid plate available. Constructed from 1/8” thick steel with a textured powder coat finish. This bumper strikes the perfect balance between protection and approach angle in addition to weight and strength.
02. WINCH PLATFORM
As the perfect addition to their full-width bumper, this winch integrates seamlessly with the front bumper and accommodates most winches rated at up to 12,000 lbs and is compatible with both roller and hawse fairleads. Constructed from 1/8” thick steel with a textured powder coat finish.
03. FRONT BUMPER SKID PLATE
It’s designed to effortlessly integrate with the full-width front bumper to provide superior under-body protection. It’s trail-ready powder coated and features core underbody protection for the most vulnerable parts of the 2021 Ford Bronco. Also features a customizable logo plate.
04. REAR BUMPER
The full-width rear bumper carries the same design cues as the front bumper for a cohesive look. It will accommodate all factory tow and safety packages while providing recovery points and auxiliary lighting provisions. It’s constructed from 1/8” thick steel and comes with a textured powder coat finish.
05. SPARE TIRE RELOCATION BRACKET
This is perfect if you want to run larger tires since a larger spare will also be needed. It’s modular and allows you to reposition the spare tire 1.9” away from the vehicle while raising the spare 2.4” or 3.4” for optimal placement depending on tire size. Bolt-on installation and constructed from 1/8” thick steel with textured powder coat finish. The most anticipated new Adventure Rig is finally out and here are some of the new parts available to help you start down the rewarding path of customizing your ride!
06. THIRD BRAKE LIGHT BRACKET
This simple bolt-on Light Bracket relocates the third brake light upwards and can be used in conjunction with the Spare Tire Relocation Bracket or on its own.
07. SIDE STEPS
Side Steps provide a functional platform to assist not only with entering and exiting two-door and four-door Broncos but can also be used if you need access to any roof-mounted accessories. Structural tubing provides increased durability and simple bolt-on installation.
08. FENDER DELETES
These Fender Deletes allow owners the ability to clean up the looks of their Bronco if they plan on getting it dirty. The kit features aluminum construction and comes with four mounting plates to fill in the fender pockets when the
OE fenders are removed, providing a finished narrow look. 09. 2.5” VSRT COILOVERS The 2.5” diameter VSRT Coilovers are the only product on the market with Vehicle Specific Ride Tuning (VSRT). They feature durable hard- anodized, thick-wall impact-forged bodies and 17-4 PH stainless steel hardened shafts that are chrome plated for maximum corrosion and abrasion resistance. They also have integrated closed-cell foam bump stops for precision- controlled unloading during impacts at full bump.
10. TUBULAR UPPER CONTROL ARMS
The all-new design provides the strength of a race-style uniball arm with the ride quality and characteristics of the factory part through the use of a high-angle ball joint. These arms provide OE-ride quality on the road and increase caster to allow for proper alignment after a lift. Low maintenance PTMEG bushing and helix grooved pivot points combined with a sealed dust cap are sure to provide years of quiet and problem-free performance.
11. ADJUSTABLE TRACK BAR
The new Track Bar for the rear of the Bronco is designed to center the vehicle after a suspension lift is added. It features an on- vehicle adjustable sleeve that allows for precise axle alignment while still on the vehicle to prevent the need to disassemble the suspension to adjust. It includes a three-piece multi-rate bushing assembly at one end and a precision alloy FK rod end on the adjustable side for improved handling and performance. It’s powder coated for maximum corrosion resistance.
ADDICTIVE DESERT DESIGNS
ROCK FIGHTER FRONT AND REAR BUMPERS
The ADD Rock Fighter front bumper features a modern radius plate steel design and a standard winch mount. There’s a universal light mount for up to a 20” radius light bar or five cube lights. There are also two light mounts on top for round lights. There’s an optional 3/16” aluminum skid plate and the vented lower panel with louvers is for intercooler airflow. Retains OEM parking sensors and there are reinforced Clevis mounts for 3/4” D-Rings. Adaptive Cruise Control relocation bracket available separately. The Rock Fighter rear bumper features a modern plate steel design and retains OEM tire mount and backup camera. The bumper also retains OEM parking sensors, hitch and license plate light. There are also reinforced Clevis mounts for 3/4” D-Rings and the 4th brake light relocation bracket is included. The Rock Fighters are fully bolt-on and made in the USA.
BAJA DESIGNS
A-PILLAR KITS
Their A-Pillar kits come with a more robust bracket to support any of their Squadron or XL series lights. They decided to throw in some additional lenses with each kit to allow enthusiasts to take advantage of their uService feature to optimize their output to their desired lighting zones.
XL LINKABLE KITS FOR THE ROOF OR BUMPER
The XL Linkable was designed for the enthusiast looking to take charge with a light package that is completely customizable for their needs. The XL Linkable provides fantastic output, as well as more adjustability than a traditional light bar that can be added to either your bumper or roofline. This kit is a turn-key LED system for the Ford Bronco owner that is looking to drastically improve the looks and performance of their truck.
REVERSE
This kit is designed for the Ford Bronco enthusiast that is looking to light up the trail with ample light and differentiate yourself from the pack. It’s a factory fog light replacement kit that plugs and plays right into your factory connectors and couldn’t be any easier to install. It comes in a variety of intensities, ranging from their road-compliant SAE Squadrons to the high output Squadron Pro series.
FOG POCKET
Whether you’re backing down a trail or backing into a camp spot, these lights will be sure to illuminate the task at hand. An easy bolt-on option to increase safety and visibility, this kit includes an auxiliary light bracket, a toggle switch harness and your choice of S1 or S2 series lights. This kit attaches directly to the spare tire mount and can accommodate factory, as well as many aftermarket wheels. If you’re looking for an awesome lighting addition for your Bronco this is it!
BDS Suspension
3 – 4.5″ DSC COILOVER SYSTEM
Take your new Ford Bronco to the next level with BDS and FOX. Designed for huge performance gains on and offroad, BDS will be offering 3.5-4.5″ (2Dr) and 3-4″ (4Dr) DSC Coilover Systems for the 2021 Ford Bronco that are ready to perform right out of the box with clearance for up to 37″ tires. Kits will begin shipping in December 2021.
CAMBURG ENGINEERING
CAMBURG FORD BRONCO 2021 SUSPENSION AND ACCESSORY PACKAGES
Camburg has teamed up with FOX Racing, Baja Designs, Method Wheels and General Tire among many other companies to offer complete suspension and accessory packages for the new 2021 Ford Bronco. Utilizing FOX’s Factory Series 2.5 DSC coilovers front and rear, Baja Designs fog, A-pillar and bumper lights with Method wheels and 35”-37” General tires will make for the ultimate trail and off-road rig.
KINETIK SERIES BILLET AND STANDARD TUBULAR UNIBALL UPPER CONTROL ARMS
Camburg Engineering has developed a few different upper control arms to match your budget and needs. They have their standard tubular Uniballs Series arms as well as their elite KINETIK Series billet uniball arms forthe new Bronco. These upper arms allow for increased wheel travel and articulation out on the trail, they correct suspension geometry for improved handling both on and off-road and are considerably higher quality and strength compared to the OEM parts for off-road use and longevity.
REAR LOWER TRAILING ARMS
With the vast amount of testing Camburg Engineering has under their belts already, they’ve addressed some of the issues with the new 2021 Ford Bronco. They’ve designed a much stronger rear lower trailing arm kit since the stock OEM versions are prone to damage as well as limiting wheel travel and articulation. They have two versions available: their thick- walled tubular uniballs series and their elite KINETIK series billet aluminum series. Both trailing arm kits utilize Made in the USA FK 1” uniball bearings for zero bind and maximum articulation with increased ground clearance and include all the necessary hardware.
FOX PERFORMANCE
ELITE 2.5 SUSPENSION
Fox has developed three aftermarket suspension platforms for the full-size Bronco. The first available is the Performance Elite 2.5 Series. It’s designed for more confidence both on and off-road with wide-range adjusters and better heat dissipation. 2.5” diameter one- piece aluminum bodies and external reservoirs increase oil volume to combat heat buildup from extended off-road use at speed. The Dual speed compression adjusters allow quick ride adaptation to a wide variety of terrain and vehicle loads, providing the ideal setting to tackle the trickiest off-road obstacles or tame the twists and turns on the road with the turn of a knob.
ICON Vehicle Dynamics
BILLET ALUMINUM REAR LINK SYSTEM
ICON Vehicle Dynamics Billet Aluminum Upper and Lower Rear Link system aids in freeing up rear axle movement on your 2021 and newer Ford Bronco to allow for increased suspension travel and articulation. Your Bronco will also benefit from their proprietary “on vehicle” Adjuster Sleeve that allows for fast, easy adjustment of Link length without requiring removal or disassembly of the Link. Each of the links are CNC machined from 6061 billet aluminum with an anodized finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty (lifetime warranty does not cover rod ends and bushings, which are consumable).
BILLET UPPER CONTROL ARMS WITH ALL-NEW DELTA JOINT PRO
Improve your Bronco’s suspension performance with ICON’s Billet Upper Control Arms. Ford designed the new Bronco with great off-road capability right out of the box, but we just couldn’t help squeezing even more performance out of it. These billet UCA’s free up movement to allow maximum travel for performance shocks and coilovers. The all new Delta JOINT PRO provides a host of durability and performance improvements compared to our standard ball joints and uni-balls, including up to 90° of free articulation to maximize suspension travel without bind. It’s also beefier and fully rebuildable.
MAGNAFLOW
THE NEW MAGNAFLOW STREET SERIES AXLE-BACK EXHAUST SYSTEM
provides owners of the 2021+ Ford Bronco (2.3L and 2.7L) with an enhanced driving experience both on and off-road. The system balances a moderate exterior sound with the comfort of a mild interior audio level, while black powder coated 4” tips and the addition of a split-dual exit design upgrade the appearance. As with all MagnaFlow Street Series products, the system for the Bronco features CNC precision manufacturing and dyno-proven performance, while offering the confidence of quality stainless steel construction and a limited lifetime warranty.
WARN ELITE BUMPERS
THE NEW ELITE BUMPERS
are WARN winch-ready and accept most WARN mid-frame winches up to 12,000 lbs. These rugged bumpers allow Ford Bronco buyers to add a winch for vehicle recovery, add extra protection to guard against trail hazards, and make the new Bronco even more capable. The bumper includes welded eyelets for shackles, ports for OE or auxiliary lights, and off-road jack tabs. It’s also available in two versions: one without the tube and one with a welded-on grille guard tube, which offers additional protection to the winch as well as an aggressive look. Additionally, the Elite Series bumper has recessed light buckets for either the OE fog lights or aftermarket units. They also feature a state-of- the-art powder-coated finish for long-lasting corrosion/UV protection.
ZONE OFFROAD
1” LEVELING KIT
Available with the standard IFS suspension or upgraded Sasquatch package providing a 1.1” taller ride height, the Bronco has clearance for up to 35” tires from the factory. Building on the 4-corner coilover design, Zone Offroad offers a 1” leveling kit designed to level out the stance and eliminate the factory nose-low rake. This improves the appearance with clearance for larger aftermarket wheel/tire packages without sacrificing vehicle driveability. The leveling kit uses a two-piece design with upper and lower strut mount spacers that install easily to provide the desired level stance on all Bronco models. These spacers are built from high-strength American steel laser cut for a precision fit and finished in a durable black e-coating. These, paired with the longer replacement hardware and step-by-step instructions, allow you to bolt on this 1” leveling kit within a few hours.
2” LIFT AND LEVEL
The team at Zone Offroad is offering a 2” lift solution designed for the base model (does not work with Sasquatch or Badlands Models) Broncos. These new 2” lift kits lift and level the stance eliminating the factory nose-low rake and allowing clearance for up to 35” tires. This new kit is designed to take advantage of the impressive travel on the new Bronco utilizing top-mounted strut spacers to raise the stance without sacrificing ride quality or overall driveability. The spacers are built from heavy-duty semi-aromatic glass-fiber reinforced nylon resin design, offering strength and a clean OE appearance once installed. These, paired with the longer replacement hardware and step-by-step instructions, allow you to bolt on this 2” lift kit within a few hours.
